U-Shaped Snake-Arm Shields

 U-Shaped Snake-Arm Shields
U-Shaped Snake-Arm Shields
U-Shaped Snake-Arm Shields
Each U-shaped snake-arm shield assembly consists of a U-shaped polycarbonate shield that is 3/16" thick (0.177" ± 10%), a shield bracket assembly, a snake arm with a direct-mount base, and mounting hardware. The direct-mount base can be fastened to most any flat surface at least 2" x 1" with the included mounting hardware (two ¼"-20 x ¾" hex socket-head cap screws, two ¼"-20 nylon-insert hex locknuts, and two No. 12 pan-head Phillips x 1" zinc-plated sheet-metal screws).

Optional mounting bases and brackets can be added to the direct-mount base to provide additional mounting flexibility. There is a magnetic base, C-clamp base, and horizontal and vertical right-angle brackets. The magnetic base consists of a 3¼"-diameter magnet with 100 pounds of holding force. The C-clamp base can be mounted to a table or ledge up to 1 7/8" thick. The horizontal and vertical right-angle brackets can be helpful in positioning the shield where you need it depending on the position the base is to be mounted.

Our U-shaped snake-arm shields are proudly made in the United States of America!

Made in The USA
Quantity Discount
5–9 5% off list price
10–14 10% off list price
15–19 15% off list price
20–24 20% off list price
25 and up 25% off list price
Note: Items within the same category may be combined for the maximum quantity discount!