General Sign Information
Safety signs are intended to identify and warn against specific hazards. They should be affixed to a prominent location on the machine so that they are easily seen and understood by operators and people in the machine area. Danray Products' one-of-a-kind, copyrighted safety signs have been designed to comply with the ANSI Z535 series of standards for the design, application, and use of signs, colors, and symbols for accident prevention. These 0.002"-thick polyester signs have a high-bond-strength acrylic adhesive by 3M that has excellent chemical resistance and holding strength even at high temperatures (up to 350°F). This adhesive is the best choice for signs that need to adhere to LSE (low surface energy) plastics, powder coatings, or oily metals.
Our safety signs are proudly designed and printed in the United States of America!
LBL-001 Bench Grinder Warning Sign
OSHA 29 CFR 1910.215 for grinders is one of the most frequently cited machine-safety standards for violations during OSHA machine-safety inspections. This is due to improperly adjusted work rests and tongues. This U.S. Copyright Office-registered warning sign can be affixed directly to bench grinders to remind employers and operators of the proper adjustments for compliance with the OSHA 29 CFR 1910.215, ANSI B11.9, and ANSI B7.1 grinder safety standards.
Dimensions: 2½" L x 3½" H.
LBL-002 General Danger Sign for Cutting and Turning Machines
One LBL-002 sign is included with every shield assembly at no extra cost, but this sign can also be purchased separately. This sign identifies and warns of hazards associated with cutting and turning machines. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-003 Danger Sign for Drilling Machines
This sign identifies and warns of hazards associated with drilling machines. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-004 Danger Sign for Milling Machines
This sign identifies and warns of hazards associated with milling machines. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-005 Danger Sign for Lathes
This sign identifies and warns of hazards associated with manual turning machines (lathes). It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-006 Danger Sign for Bench Grinders
This sign identifies and warns of hazards associated with bench grinders. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-007 Danger Sign for Surface Grinders
This sign identifies and warns of hazards associated with surface grinders. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-008 Danger Sign for Sawing Machines
This sign identifies and warns of hazards associated with sawing machines. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.
LBL-009 Warning Sign for Safety Blocks
This sign identifies and warns of hazards associated with improperly used safety blocks. It also outlines requirements for their safe usage.
Dimensions: 5" L x 6" H.